Semiauto clock set, Manual clock set, Pg. 25), the – JVC LPT0838-001C User Manual
Page 25: Pg. 25), Em. in this case, perform “semiauto clock set, Or “manual clock set, Orm “manual clock set, Pg. 25) and
Masterpage:Right-No-Heading
EN
25
Filename [XVC33U_06Index.fm]
Page 25
22 July 2003 3:07 pm
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps
pg. 24), then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
A
Set “AUTO CLOCK” to “ON”.
B
Select the host channel.
You can either select “AUTO” or enter a PBS channel
number.
Press OK or e to move the highlight bar to “HOST CH”,
then press rt repeatedly until “AUTO” or the desired
PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
C
Select the D.S.T. mode.
Press OK or e to move the highlight bar to “D.S.T.”, then
press rt repeatedly until the desired setting is selected.
AUTO: Select if you want to adjust your VCR’s clock
automatically by the incoming signal from the
host channel. Be sure to select the correct time
zone manually in step
ON:
Adjustment will be made by the built-in clock
itself.
OFF:
Select when Daylight Saving Time does not apply
to you.
D
Select the time zone.
Press OK or e to move the highlight bar to “TIME
ZONE”, then press rt repeatedly until “AUTO” or the
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
{
AUTO{ATLANTIC{EASTERN{CENTRAL{
MOUNTAIN{PACIFIC{ALASKA{HAWAII{
(back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected “AUTO” for the host channel in
step
B, be sure to select the correct time zone manually.
E
Complete the Semiauto Clock Set.
Press SET UP MENU to return to normal screen.
Manual Clock Set
First follow steps
pg. 24), then go
to the following steps.
A
Set time, date and year.
B
Select D.S.T. mode.
C
Start clock.
Press SET UP MENU and normal screen appears.
To make corrections any time during the process
Press OK or e repeatedly until the item you want to change
blinks, then press rt.
Press OK or e repeatedly to
move the highlight bar to
“AUTO CLOCK”, then press
rt so that “ON” is selected.
IMPORTANT
Turn off the unit after performing Semiauto Clock. “AUTO”
will appear on the front display panel while the clock is
being set. The current clock time will appear automatically
when the clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, —
— on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
— on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
Press rt until the desired
time appears, then press OK
or e. Set the date and year in
the same way.
● Holding rt changes the time
in 30-minute intervals, or
changes the date in 15-day
intervals.
Press OK or e to move the
highlight bar to “D.S.T.”, then
press rt to select the
desired setting.
ON:
Adjustment will be
made by the built-in
clock itself.
OFF:
Select when Daylight
Saving Time does not
apply to you.
XVC33U_01.book Page 25 Tuesday, July 22, 2003 3:20 PM