JVC 0706TKH-MW-VPC - Manual (Page 6)

5
Set Up
Auto Program
Video-3 Setting
AI Volume
HDMI Setting
PC Position
Video
Off Video
Teletext Language
Edit/Manual
Video-1 Setting Language
Lamp Timer Reset
Set Up
IMPOR
T
ANT!
PREP
ARE
USE
SETTINGS
TR
OUBLE?
Select “Set Up”
Display the menu bar
Select “Lamp Timer Reset”
Finish
select
next
select
next
5
6 Install the NEW lamp unit
7
Reinstall the lamp cover
The Lamp Timer is
Reset Successfully Press OK to Reset
the Lamp Timer
Tighten the screw.
4
1
2
3
4
Finally, the lamp has been replaced!
1
3
Turn the TV on Plug in the TV
Reset the lamp timer
If the lamp unit is not installed securely
(e.g. fl at in the lamp housing area), the
TV won’t turn on. In this case, reinstall
the lamp unit.
Make sure the lamp sits securely
and fl at in the housing area.
Never dispose of the lamp with normal trash!
The lamp contains a small amount of mercury. For disposal or recycling information, please
contact your local authorities or consult your retailer.
Dispose of it in the same way as disposing of fl uorescent lamps.
If the power lamp and LAMP indicator blink rapidly after turning on the TV “Lamp” (P. 21)
Insert Re-tighten
Unpack
It may shatter the lamp causing injuries.
Do not drop the lamp!
Do not shock the glass surface of
the lamp!
Oils deposited from the fi nger may
cause a difference in temperature
when the lamp heats up to its
operating temperature, causing the
lamp to break.
Never touch the glass
surface of the lamp! !
2
!