JVC HR-XVC32SUJ - Manual (Page 28)

28
Editing
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the
recording deck. You can use a camcorder as the source
player and your recorder as the recording deck. Refer
also to the other components’ instruction manuals for
connection and its operations.
~
Make connections.
Connection with another video recorder
1 When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors on
the rear panel to the recording deck.
2 When using your unit as the recording deck ...
... connect its VIDEO/AUDIO connectors on the front
panel to the source player.
Connection with a camcorder
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the unit’s VIDEO/AUDIO connectors on
the front panel via a cable adapter.
Ÿ
Select the VCR deck.
Press VCR on the Remote so that the VHS indicator
lights up on the front display panel.
!
Load cassettes.
Insert the playback cassette into the source player and
the cassette to be recorded on into the recording deck.
⁄
Select input mode on recording deck.
Select the correct external input on the recording deck.
On this recorder, press AUX (number button “0”) and/or
CH +/– to select “F-1.”
@
Select edit mode.
See “PICTURE CONTROL” on page 32.
¤
Set the recorder to the record pause mode.
Locate the point where you start recording on the
source player, then operate the recorder so that
recording is paused.
#
Start playback on the source player.
‹
Start recording on the recorder.
When using the unit as the source player
TV Your unit
Source player
Another recorder
To AV input
To AV input
Recorder
Audio/video
cable
Audio/video
cable
Audio/video
cable
Audio/video
cable
Your unit Recorder
Source player
Another recorder
When using the unit as the recorder
To AV input To AV output
To AV output
24-31_HR-XVC32SUJ.indd 28 24-31_HR-XVC32SUJ.indd 28 05.4.21 6:31:54 PM 05.4.21 6:31:54 PM