JVC KD-AR860 - Manual (Page 49)

49
ENGLISH
To be continued....
Symptoms Causes Remedies
Graphics
• Download does not seem
to finish.
It takes quite a long time to
download an animation of
many frames (see page 46).
• Opening and ending
animation does not appear.
“KeyIn CFM” is set to
“Off.” Select “On” (see page 28).
• Animation does not move. Temperature inside the car is
below 0°C (32°F)—
appears on the display.
Wait until the operating
temperature resumes.
• The entire animation has
not been downloaded.
“Opening” and “Ending”
can only memorize 30
frames of the animation even
it includes 90 frames.
Preferred setting modes—PSM
• The display graphic
function does not work
correctly.
Temperature inside the car is
below 0°C (32°F)—
appears on the display.
Wait until the operating
temperature resumes.
• You cannot select an
image or animation for
“Pict” (“No Picture,” “No
Movie,” or “No Slide,” is
shown as the selectable
item).
No files are downloaded yet. Select an image only after
downloading the appropriate
files in memory.
CD changer
• “No Magazine” flashes on
the display.
No magazine is loaded in the
CD changer. Insert the magazine.
• “No Disc” flashes on the
display.
No disc is in the magazine. Insert disc into the magazine.
Disc is inserted upside down. Insert disc correctly.
• “Reset 08” flashes on the
display.
This receiver is not
connected to the CD changer
correctly. Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
• “Reset 01” – “Reset 07”
flashes on the display.
The CD player may have
functioned incorrectly. Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc. Reset the receiver (see page
2).
EN46-51_KD-AR860[J]f.indd 49 EN46-51_KD-AR860[J]f.indd 49 12/17/04 5:43:36 PM 12/17/04 5:43:36 PM