JVC KD-AR860 - Manual (Page 31)

31
ENGLISH
Indications Selectable settings, [reference page]
Sirius ID* 2
SIRIUS ® ID
The 12-digits SIRIUS identification number is shown on the display,
[38].
Beep
Key-touch tone
On: [Initial]; Activates the key-touch tone.
Off: Deactivates the key-touch tone.
Ext Input* 3
External input
Changer: [Initial]; To use a JVC CD changer, [14].
Ext In:
To use any external component (other than SIRIUS DLP),
[37].
Telephone* 4
Telephone muting
Muting1/Muting2: Select either one which mutes the sounds while
using the cellular phone.
Off: [Initial]; Cancels.
• If CD or CD changer has been selected as the source, playback pauses
during telephone muting.
Amp Gain
Amplifier gain control You can change the maximum volume level of this receiver.
High PWR: [Initial]; Volume 00 – Volume 50
Low PWR:
Volume 00 – Volume 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent them
from damaging the speaker.)
Off* 4 : Deactivates the built-in amplifier.
Color Sel
Color selection [Initial: AllSource]; You can select your favorite display color for each
source (or for all sources), [33].
Color Set
Red
Green
Blue
You can create your own colors, and select them for the display color,
[34].
Day Color: User color during the day time*
1 .
NightColor: User color during the night time* 1 .
00 – 11 [Initial: Day Color: 07, NightColor: 05]
00 – 11 [Initial: Day Color: 07, NightColor: 05]
00 – 11 [Initial: Day Color: 07, NightColor: 05]
* 2 Displayed only when SIRIUS radio is connected.
* 3 Cannot be selected if the source is “CD-CH” or “EXT-IN.”
* 4 Only for KD-AR860.
EN26-31_KD-AR860[J]f.indd 31 EN26-31_KD-AR860[J]f.indd 31 12/17/04 5:42:27 PM 12/17/04 5:42:27 PM