JVC AV 27D200 - Manual (Page 28)

2 8 B U T T O N F U N C T I O N S
ON/MOVE (Picture in Picture)
PIP allows you to view two pictures
simultaneously.
(PIP) O N /M OVE
E XIT to turn PIP off
Note: The PIP channel and main
screen channel will appear in the
display momentarily right after you turn
on PIP. You can leave them up
permanently by pressing D
ISPLAY until
you reach the mode.
Note: The PIP Screen is 1/9 of the
regular screen size.
Once PIP is turned on, the O N /M OVE
button operates the Move feature.
FREEZE
You can freeze the picture in the main
screen into the PIP window.
F REEZE
Note: When the PIP is off, pressing
F REEZE takes a snapshot of the main
screen and puts it into the PIP
window… great for catching those mail
order addresses.
Note: When the PIP is on F REEZE stops
the PIP picture.
SOURCE
You can select the source for the PIP
window.
S OURCE
Note: When you connect the
component input (DVD) to V-2, the PIP
window will be blue.
SWAP
You can swap the PIP picture and the
main picture.
S WAP
02
07
You can move the PIP window to any of
the TV’s four corners.
O N /M OVE
Note: Each press of the On/ M OVE
button will shift the PIP window one
position.
Note: When the PIP screen has no
signal, the PIP window will be blue.
TV V-1 V-2
CHANNEL –/+ For PIP
Change the channel in the PIP window.
C H –/+
PIP NOT E S
D-500 Series models have 2 Tuner PIP and can see
two signals at once. This means you can view two
channels at the same time.
In order for PIP to work, the T V must be set to "TV
mode".
If you use your VCR to play a video, the VCR will
automatically switch your input to VCR mode. In VCR
mode, the T V sees only one signal, that of the VCR.
In order to view PIP, you then need to press the
TV/VCR button on your VCRremote to switch back
to T V mode.
NOTES:
Picture in Picture is
available on the
following models
only:
• AV-32D500
• AV-27D500