JVC GR-D290 EN - Manual (Page 43)

EN
43
MasterPage: Start_Right
AD
V
A
N
C
ED
F
EA
T
UR
ES
EDITING
A To S-VIDEO IN or OUT**
B Yellow to VIDEO IN or OUT
C Red to AUDIO R IN or OUT
D White to AUDIO L IN or OUT
* If your VCR has a SCART connector, use the
provided cable adapter. (The provided cable
adapter accepts only output signals from this
camcorder. To use this camcorder as a recorder,
use a commercially available cable adapter.)
** Connect when your TV/VCR has an S-VIDEO
IN/OUT connector. In this case, it is not
necessary to connect the yellow video cable.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
To use this camcorder as a player
1
Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2
Start playback on the camcorder. ( ੬ pg. 20)
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
੬ pg. 14)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(
੬ pg. 31, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(
੬ pg. 31, 36)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (
੬ pg. 31, 36)
To use this camcorder as a recorder
1
Following the illustrations, connect the
camcorder and the VCR’s output connectors.
2
Set the camcorder’s Power Switch to “PLAY”.
3
Set “REC MODE” to “SP” or “LP”. ( ੬ pg. 35)
4
Set “S/AV INPUT” to “A/V IN” or “S IN”*.
( ੬ pg. 31, 36)
* Select “S IN” when using S-VIDEO OUT
connector on your TV/VCR.
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
● The “ ” or “ ” indication appears on
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The
indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The indication stops
rotating.
9
Press 8 to return to the normal playback
mode.
NOTES:
● After dubbing, set “S/AV INPUT” back to “OFF”.
● Analogue signals can be converted to digital
signals with this procedure.
● It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
2 4 1 3
TV
VCR
Open the cover.
S/AV cable
(provided)
To S/AV connector
To VCR
“Y/C”/“CVBS”
Video Out Select
Switch
Cable
Adapter*
mark
A/V IN S IN
GR-D290_270PAL.book Page 43 Tuesday, March 22, 2005 2:59 PM