beautypg.com

Others – JVC BD-X200U User Manual

Page 46

background image

85

NETWORK MENU Screen

The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half

: Appearance on monitor screen

Bottom half : Appearance on LCD display
[ ]

: Default setting

Parameter

Possible settings

Description

HOST NAME

bdx200

HOST

IP ADDRESS

[192.168.0.2]

IP ADD

SUBNET MASK

[255.255.255.0]

SUBNET

DEFAULT

[192.168.0.254]

GATEWAY

GATE

MENU

This parameter is used to enter the BD-X200’s network name using a keyboard.
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
(-))

This parameter is used to set the IP address. It is important to ensure that no two
devices on a single network share the same IP address.

This parameter is used to set the subnet mask. Connected BD-X200s should have
the same network setting.

This parameter is used to set the gateway address. Connected BD-X200s should
have the same address.

This button is used to return to the Setup Menu screen.

Others

Troubleshooting

Before requesting for repair, please check the following URL:
http://www.jvc-victor.co.jp/english/pro/prodv/
If problem persists, contact either the store where the BD-X200 was purchased or your nearest JVC authorized dealer.