JVC GET0686-001A - Manual (Page 14)

14 ENGLISH
Troubleshooting
Symptom Remedy/Cause
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level. / Make sure the unit is
not muted/paused. (page 6) / Check the cords and connections.
“MISWIRING CHK WIRING THEN RESET
UNIT” / “WARNING CHK WIRING THEN
RESET UNIT” appears on the display and no
operations can be done. Check to be sure the terminals of the speaker leads are covered
with insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC car audio
dealer or a company supplying kits.
The unit does not work at all. Reset the unit. (page 3)
“F-AUX” or “R-AUX” cannot be selected. Check the
= setting.
(page 13)
Sound is sometimes interrupted while
listening to an external component
connected to the auxiliary input jack. Check to be sure the recommended stereo mini plug is used for
connection. (page 10, 11)
The correct characters are not displayed
(e.g. album name). This unit can only display letters (upper case), numbers, and a
limited number of symbols.
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
“AM” cannot be selected. Check the
= setting. (page 13)
Sound quality changes when receiving
HD Radio stations. Fix the reception mode either to .
(page 8)
No sound can be heard. • is selected when receiving all digital broadcast of
HD Radio station. Select . (page 8)
• is selected when receiving weak digital signals
or receiving conventional radio broadcast. Select AUTO>. (page 8)
Disc
playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back and
track cannot be skipped. Insert a finalized CD-R/CD-RW (finalize with the component
which you used for recording).
EN02-17_KD-HDR44[J]_f.indd 14 EN02-17_KD-HDR44[J]_f.indd 14 11/23/10 11:14:34 AM 11/23/10 11:14:34 AM