JBL ESC550 - Manual (Page 14)

– 14 –
The Source has a unique fea-
ture that will automatically
place up to 32 stations in
memory.
To activate this feature, push
and hold the “Auto” button for
one second.
The tuner will search the dial
and place the stations with a
strong signal into memory.
Push “Auto Tune” on The
Source. Then when you push “<<” or
“>>” on The Source or the remote the tuner will auto-
matically advance to the next
station with a strong signal.
If a Selected FM Station is a Little Noisy:
Push “Stereo/Mono” on The
Source. This will play the
selected station without any
stereo separation, but there
will be much less background
noise. The “<<” or “>>” on The
Source or the remote control will tune
up or down one frequency
at a time.
Stereo/Mono Tape/Aux
TV Auto Tune
Rear
Speakers
AM/FM
TV
Aux
To Have the Tuner Search for the Next Strong Station:
Stereo/Mono Tape/Aux
TV Auto Tune
AM/FM Repeat
Rear
Speakers
AM/FM
TV
Aux
Preset Operation
1. Tune to the station that
you want to add into memory.
2. Push “Add” on The Source.
That station is now added to
your selection of stations in
memory.
Tuner Presets
Auto Add
Delete
4. To skip between preset
stations: Push “|<” or “>|”
on The Source or the remote control.
Skip
Search
Tune
Tuner Presets
Auto Add
Delete
3. To delete a preset:
Push “Delete” on The Source.
That station is now removed
from your selection of stations
in memory.
Note: Activating this feature
will delete all stations that
were previously stored in
memory. To prevent this from
accidentally occurring, the
Auto button will only activate
if held for a full second.
Tuner Presets
Auto Add
Delete
Skip
Search
Tune
Skip
Search
Tune
AM/FM
TV
Aux
ESC550 Simply Cinema OM 7/22/98 4:34 PM Page 14