Viewfinder adjustment, Brightness adjustment of the display, Tripod mounting – JVC GR-D350U User Manual
Page 15: 15 brightness adjustment of the display, 15 tripod mounting, Diopter adjustment control, Pg. 15), Nder (੬ pg. 15), Stud hole (੬ pg. 15), Et (੬ pg. 15)
EN
15
GETTING STARTED
MasterPage: Start_Right
GETTING ST
AR
TED
1
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
1
Set the Power Switch
to “REC” or “PLAY” while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. (
● To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(
3
Press MENU. The
Menu Screen appears. If
you are in Playback mode,
please proceed to Step
4
Press 3 or 4 to select “DISPLAY”, and press
SET or 2. The DISPLAY Menu appears.
5
Press 3 or 4 to select “BRIGHT”, and press
SET or 2. The Menu Screen closes and the
brightness control menu appears.
6
Press 3 or 4 until the appropriate brightness
is reached and press SET or 2.
7
Press MENU. The menu screen closes.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
● Some tripods are not
equipped with studs.
Viewfinder Adjustment
Diopter Adjustment Control
Example:
Brightness Adjustment Of The
Display
Tripod Mounting
–1
BRIGHT
1
1
1
1
2
2
2
2
MENU
4
4
4
4
3
3
3
3
GR-D350US.book Page 15 Tuesday, June 20, 2006 4:58 PM