Jet Tools OES-80CS - Manual (Page 6)

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model OES-80CS Sander. This manual contains instructions on installation, safety precautions,
general operating procedures, maintenance instructions and parts breakdown. This machine has been
designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Stock Number.................................................................................................................................708447
Fence........................................................................................................................................4”H x 24”L
Abrasive Belt Size .................................................................................................................... 6”W x 89”L
Dust Chute Diameter .............................................................................................................................. 4”
Extension Table Size............................................................................................................9-7/8 x 11-7/8
Table Size ................................................................................................................................ 32”L x 7”W
Table Tilt ..............................................................................................................................................90
°
Motor.................................................................................................................................. 1-1/2 HP, 1 Ph
............................................................................................................................. 115/230V, prewired 115
Belt Speed (SPFM)........................................................................................................................... 3,900
Overall Dimensions .................................................................................................. 51”L x 26.5”W x 20”H
Net Weight (approx.)......................................................................................................................258 lbs.
Shipping Weight (approx.) .............................................................................................................275 lbs.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.