JVC HR-J245EA - Manual (Page 16)

16
EN
G-
CODE
Timer
Programming
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
TIMER RECORDING (cont.)
Before performing G -CODE timer recording, be sure to read
"G -CODE Setup" (
੬
pg. 14).
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the appropriate
NUMBER keys to enter the
G
-CODE number.
● If you made a mistake,
press CANCEL and enter
the correct G
-CODE
number.
CHECK INPUT DATA
3
Press OK on the remote
control. The G
-CODE
Programming screen
appears.
● If the G
-CODE number
you entered is incorrect,
"ERROR" will be
displayed on the screen.
Press CANCEL and enter the correct G
-CODE number.
● If you want to cancel the programme even though
"ERROR" is NOT displayed on the screen, press OK
and then go to "Check And Cancel Programmes" on
page 21.
● If "ERROR=GUIDE PROG" appears on the screen, see
"ATTENTION – Regarding Guide Program Number
Set" on page 17.
SET TAPE SPEED
4
Press (SP/LP).
RETURN TO NORMAL
SCREEN
5
Press OK.
● Repeat steps 1–5 for each additional programmes.
ENGAGE TIMER MODE
6
Press TIMER.
TIMER PROGRAMMING
[0-9] : G-CODE
[CANCEL] : EXPRESS PROGRAMING
[MENU] : MAIN MENU
G-CODE
1 2 3 4 5 6
[0-9] =
[CANCEL] : DELETE
[MENU] : EXIT
– P1 –
G-CODE 12345678
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.12 29
: OK
4
¶
1
4 ¢
7
3
8
¡
1 2 3
4 5 6
7 /
8
0
9
2
1
3
NUMBER
TIMER
CANCEL
OK
WEEKLY
ADD TIME
DAILY
PROG
q 5 / 8
2 3
To Delay The Stop Time . . .
. . . press ADD TIME after pressing OK in step 3. Each time you
press, the Stop time is delayed by 5 minutes (meaning that 5
minutes of recording time is added). You can easily compensate
for anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday–Friday).