JVC HR-J245EA - Manual (Page 14)

14
EN
The G -CODE timer programming system eliminates the need to
input channel, date, start and stop time data when setting the
timer record function. Simply key in the G
-CODE number for the
TV program you wish to record (found in most TV listings) and
the recorder’s timer is automatically programmed.
You have to set "Guide Prog." numbers, which are assigned to
each station for purposes of G
-CODE timer programming, for all
the stations stored in your recorder's memory to get proper
results. If you know the Guide Prog. numbers, perform the
following steps. If not, go to "Guide Prog. Number Set" on page
15.
Before G -CODE setup you must have performed the following
procedures:
● Tuner setting ( ੬
pg. 4, 24)
● Clock setting ( ੬
pg. 6)
G
-CODE
Setup
TIMER RECORDING
Guide Program Number Set
IMPORTANT
Perform the following procedure after Auto Set Up on page 4
and/or the channel setting steps on pages 24 – 27.
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
MAKE LIST OF STORED
STATION NAMES,
CHANNEL POSITIONS
AND GUIDE PROG NO.
1
(Ex.)
TURN ON THE RECORDER
2
Press .
ACCESS MAIN MENU
SCREEN
3
Press MENU twice.
A Channel B Station C Guide Prog.
position name No.
1 ABC 1
2 SBS 2
q 5 / 8
2 3
TV PROG
4
¶
1
4 ¢
7
3
8
¡
1 2 3
4 5 6
7 /
8
0
9
2
1
3
MENU