JVC KS-FX230 - Manual (Page 21)

ENGLISH
21
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front: 35 watts per channel
Rear: 35 watts per channel
Continuous Power Output (RMS):
Front: 15 watts per channel into 4
Ω
, 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Rear: 15 watts per channel into 4
Ω
, 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Load Impedance: 4
Ω
(4 to 8
Ω
allowance)
Tone Control Range:
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Frequency Response: 40 to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance: 1.0 V/20 k
Ω
load
(250 nWb/m)
TUNER SECTION
Frequency Range:
FM: 87.5 to 108.0 MHz
AM: (MW) 522 to 1,620 kHz
(LW) 144 to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75
Ω
)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75
Ω
)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 to 15,000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
CASSETTE DECK SECTION
Wow & Flutter: 0.11% (WRMS)
Fast-Wind Time: 100 sec. (C-60)
Frequency Response:
50 to 16,000 Hz (± 3 dB)
Signal-to-Noise Ratio: 54 dB
Stereo Separation: 40 dB
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 volts (11 to
16 volts allowance)
Grounding System: Negative ground
Dimensions (W x H x D)
Installation Size: 182 x 52 x 150 mm
Panel Size: 188 x 58 x 14 mm
Mass: 1.4 kg (excluding accessories)
Design and specifications subject to change
without notice.
19-21.KS-FX230.E 98.4.2, 5:28 PM 21