Specifications, Typical connection method to an amplifier, Speaker layout – JVC SP-XF51F User Manual
Page 5
– 5 –
Specifications
SP-XF51F (Front speakers)
Type:
2-way 3-speaker Bass reflex type
(Magnetically-shielded type)
Speaker unit:
5.5 cm cone (x 2), 1.5 cm dome
Frequency range:
90 Hz to 20 000 Hz
Impedance:
6
Ω
Power handling capacity:
100 W
Sound pressure level:
79 dB/W•m
Dimensions:
250 mm (W) x 1 104 mm (H) x 250 mm (D)
Mass:
2.6 kg each
SP-XF51S (Surround speakers)
Type:
2-way 3-speaker Bass reflex type
Speaker unit:
5.5 cm cone (x 2), 1.5 cm dome
Frequency range:
90 Hz to 20 000 Hz
Impedance:
6
Ω
Power handling capacity:
100 W
Sound pressure level:
78 dB/W•m
Dimensions:
250 mm (W) x 1 104 mm (H) x 250 mm (D)
Mass:
2.5 kg each
SP-XF51C (Center speaker)
Type:
2-way 3-speaker Bass reflex type
(Magnetically-shielded type)
Speaker unit:
5.5 cm cone (x 2), 1.5 cm dome
Frequency range:
90 Hz to 20 000 Hz
Impedance:
6
Ω
Power handling capacity:
100 W
Sound pressure level:
81 dB/W•m
Dimensions:
320 mm (W) x 75 mm (H) x 92 mm (D)
Mass:
0.9 kg
Typical connection method to an amplifier
Connect the speakers to the speaker terminals of the
amplifier with the speaker cords by referring to the diagram
below.
• Make sure to match the polarity (
ª and ·) when
connecting the speaker cords.
• The diagram below is an example of a typical connection.
SURROUND
SPEAKERS
LEFT
RIGHT
LEFT
RIGHT
CENTER
FRONT
SURROUND
BACK
FRONT RIGHT
SURROUND RIGHT
SURROUND LEFT
CENTER
FRONT LEFT
Recommended to use
SP-SB101—optionally
purchased.
Speaker layout
Center
speaker
Front right
speaker
Front left
speaker
Subwoofer
Surround right
speaker
Surround left
speaker
English
EN_SP-XF51[US].p65
05.2.18, 5:36 PM
5