Janome MEMORY CRAFT 4900 QC - Manual (Page 57)

5 5
START
STOP
29
Tacking
Machine settings
q Pattern: 29 (mode 2)
w Thread tension: Satin stitch foot F
e Presser foot: 3–6
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
To sew
Depress the foot control until the machine stops automati-
cally.
The machine will sew a tacking 1.5 cm (9/16˝) long auto-
matically.
q 1.5 cm (9/16 ˝)
q w e
q
r
e
w
t
To sew a shorter tack
To sew a tack shorter than 1.5 cm (9/16˝), first stop the
machine after sewing the required length
e , and then
press the reverse stitch button r .
The required length has been determined.
Restart the machine and continue sewing until the ma-
chine stops automatically.
w Starting point
e Required length
r Reverse stitch button
t Tack length
To sew the same size tack
To sew another tack at the same size, simply restart the
machine and it will stop automatically when finished
sewing.
To sew a tack at a different size
To sew the next tack in a different size, press the memory
key and start sewing. Press the reverse stitch button after
sewing the required length.
The required length has been determined.