Janome MEMORY CRAFT 4900 QC - Manual (Page 50)

4 8
⁄1 The patch should be cut 1 to 1.5 cm (7/16˝ – 10/16˝)
away from the hole. The corners should be cut rounded
off as shown.
e Right side of patch
r Wrong side of garment fabric
⁄2 Place the facing on the wrong side of the garment fabric.
Mark the 4 corners with pins as shown.
t Facing
y Garment fabric
⁄3 Turn all the layers over and cut the buttonhole opening
on the facing in the same way as step
c .
Four marker pins show you the corner points on the
facing. Fold back each flap between the facing and
patch.
t Facing
y Garment fabric
⁄4 Stitch around the opening with a needle and thread as
shown.
t Facing
y Garment fabric
⁄5 Welted buttonhole is complete.
y Garment fabric
⁄1
⁄2
⁄3
⁄4
⁄5
r
e
t
y
y
y
y
t
t