Janome MEMORY CRAFT 4900 QC - Manual (Page 20)

1 8
Bobbin Winding
• Removing the bobbin
q Hook cover plate release button
w Hook cover plate
e Bobbin
Slide the hook cover plate release button q to the right,
and remove the cover plate w .
• Setting the spool of thread
q Spool pin
w Large spool holder
e Small spool holder
r Spool stand
Lift up the spool pin q . Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder
w , and press it firmly
against the spool of thread.
q
w
e
w
q
e
q
q
w
r
The small spool holder e is used with narrow or small
spools of thread.
If the thread slips off the spool and jams around the
spool pin, use the spool stand
r .
Lift out the bobbin e from the bobbin holder.