John Deere 315 - Manual (Page 2)

UPTIME MAINTENANCE PLANNER
Every Every Every Every
250 500 1000 6000
Hours Hours Hours Hours
Engine Oil Filter RE519626 1 1 1 1
In-line Fuel Filter T257865 1 1 1
Water Separator/FuelFilter RE508202 1 1 1
Auxiliary Water Separator/Fuel Filter— AT365870 1 1 1
If Equipped
Primary Air Cleaner Element
AT338105 1 1 1
Hydraulic Oil Tank Breather Element AT101565 1 1 1
Hydraulic System Return Oil Filter AT314164 1 1 1
Secondary Air Cleaner Element AT336803 1 1
Engine TY26669 3 9.0 L 9.0 L 9.0 L 9.0 L
(2.4 gal.) (2.4 gal.) (2.4 gal.) (2.4 gal.)
Hydraulic Tank TY26669 3 19.0 L 19.0 L
(5.0 gal.) (5.0 gal.)
313 (per side) TY26669 3 14.8 L 14.8 L
(3.9 gal.) (3.9 gal.)
315 (per side) TY26669 3 16.3 L 16.3 L
(4.3 gal.) (4.3 gal.)
Hydrostatic Planetary Gear Case Oil— TY6382 3 0.55 L 0.55 L 0.55 L
If Equipped (CT315 only) (18.6 oz) (18.6 oz) (18.6 oz)
COOL-GARD™ II Pre-Mix TY26575 6.2 L
(1.7 gal.)
Coolant Extender TY26603
Diesel Engine Oil AT346594 1 1 1 1
Diesel Fuel AT180344 1 1 1
Hydraulic & Hydrostatic Oil AT346594 1 1 1
Hydraulic & Hydrostatic Planetary Gear
Case Oil AT346594 2 2 2
Engine Coolant TY26873 1 1 1
COOL-GARD™ II Test Strips TY26605 1 1
REQUIRED PARTS
Initial
Service 1 —
250 Hours
Initial
Service 2 —
500 Hours
1 Perform initial service once after first 250 hours of operation, then every 500 hours thereafter.
2 Perform initial service once after first 500 hours of operation, then every 1000 hours thereafter.
3 See operator's manual for recommended oil type and oil viscosities based on operating temperatures.
4 Based on fluid analysis results, intervals may need to be adjusted for operating conditions. Consult your local John Deere dealer.
Description Part Number
Fluid Analysis Kits 4
John Deere PLUS-50™ II Oil
Chain Case Only
As Required
T228243 25MAR13
T228244-28 | T243923-59 | T228245-63