JBL HTI6C - Manual (Page 6)

6
HTI6C
E X I S T I N G C O N S T R U C T I O N
Remove the grille from
the speaker frame.
≥ 1/2"
≥ 1/2"
≥ 1/2"
Cut the drywall.
Connect the speaker wires
to the speaker. Place the frame assembly
in the wall. Screw down each of the three
Phillips head screws. The locking
tabs will swivel into place and
secure the unit to the rear surface
of the drywall.
Replace the metal grille.
Determine the correct speaker
location.
Note: Always allow at
least one-half inch between a
wall stud and the speaker cutout
or the locking tabs will not be
able to swivel into place.