IBM 715 P/N - 13H6715 - Manual (Page 16)

Page 16 of 47
7. If your operating system restarts without error, proceed to " Updating the MMPM/2 for
Multimedia Modem Plus ."
If errors occur:
Refer to the documentation that comes with your computer and your existing
devices to find an unused setting that you can use for the Multimedia Modem Plus
adapter.
If you have a COM port or IRQ identifier conflict, check your computer manual
to determine if you have an unused COM port and IRQ identifier pair. After
resolving the conflict, run SETUP again to change the settings.
NOTE: If an IRQ assigned to a printer port (LPT1) conflicts with one of the Multimedia Modem
Plus IRQ settings, the Multimedia Modem Plus can use the IRQ if a printer is not connected to
the port.
When you have successfully completed CONFIGO.EXE, select EXIT to end the program.
When the configuration for OS/2 is complete, shutdown and restart your computer.