iHome IP23 - Manual (Page 8)

Operating the Unit
Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Once an alarm is set, press the associated alarm button to view the currently set alarm time and to toggle the alarm on
(icon) or off (no icon).
2. To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is armed, the related
alarm icon will appear on the right side of the display.
Resetting the Alarm to Come on the Next Day
1. When the alarm is sounding, press the Button to stop the alarm and reset it to come on the following day. You can
also press the alarm button for the sounding alarm (alarm 1 or alarm 2) to reset it.
Snooze Operation
1. By default, snooze lasts for 9 minutes. To adjust the snooze time, press and hold the Snooze/Dimmer Button until the
display flashes. Press the or Button to set the snooze timer from 1 to 29 minutes.
2. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the set
snooze time. Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The unit has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure.
Charging your iPhone/iPod
Gently dock your iPhone/iPod using the
insert for your iPhone/iPod (see Qucik Start guide). Using an insert provides the best
stability and protection, but you can safely dock your iPhone/iPod without an insert.
1. While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Back
up batteries will NOT charge iPhone/iPod. Note that non-docking iPhone/iPod models will NOT charge.
Listening to your iPhone/iPod
1. Dock your already playing iPhone/iPod. The unit will automatically turn on and after a few moments you will hear the audio
playing from your iPhone/iPod, starting softly and gradually increasing to the set volume.
Note:
If the volume on the playing track is too low, the unit may not detect that your iPhone/iPod is in play mode. If this
happens, press the Button on the main unit to play it.
2. When the iPhone/iPod is docked and in standby mode, press the Button on the unit to play it. The will appear on
the display, indicating iPhone/iPod play mode.
3. Press the Button to pause play; press again to resume it.
4. Press the
Volume and Volume Button to adjust the system volume.
5. Press the or Button on the unit to go to the next or previous track. Press and hold while a track is playing for high
speed forward or reverse music search of the current track.
6. To turn off the unit, press the Button. The iPhone/iPod will continue charging while in the dock.
5