Ip23 quick start, Time sync, Inserts – iHome IP23 User Manual
Page 5: Power
2
Note: An insert provides the best stability and safety for your iPhone/iPod, but you can safely dock your iPhone
or iPod without an insert, provided you always do so with care. If you prefer to use an insert and don’t have one
for your model, please visit www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one.
2: inserts
Attach AC adaptor cable to jack
on back of the unit and plug the
other end into a wall socket to
play and charge iPhone/iPod.
Insert playing iPhone/iPod into the dock
(must not be in a “skin” or case). Your
audio will play through the unit. Press
volume buttons to adjust volume.
iPhone/iPod will charge while docked.
3: iPhone/iPod
1: AC power
iP23 Quick Start
Select the dock insert for your
iPhone/iPod model from the table
below and place insert in dock.
To remove insert, place
thumbnail in slot and gently pull
upwards.
iPhone 3G
insert 15
iPhone 3G/3GS
iPod touch 2G
insert 16
iPod touch 2G/3G
iPhone 4
insert 19
nano 6G/touch 4G
insert 20
nano 6G
iPod touch 4G
iPhone 4
nano 5G
insert 18
nano 5G
Use this insert
For this iPhone / iPod
RESETRESET
TESTTEST
4:time sync
• Make sure your iPhone or iPod is properly docked
• Press the Time Sync/Set button on the back of the unit
• “SYNC” will appear on the display, followed by “DONE”
• If “FAIL” appears, try again with a different iPhone or iPod, or see
Setting Time Manually (page 4).
1: power