Invacare FWD - Manual (Page 58)

Battery Chargers & Harnesses
NOTE: Light Duty, 250-S models use a 4 amp. charger #1061411.
A - Items 2 and 3 changed after 4/14/99. Order Items 2 and 3 together for chairs manufactured before 4/15/99.
B - On 7/18/01 Lester 8AMP battery charger was reinstated.
C - Plastic wire wrap replaced mesh fabric and heat shrink 9/1/99. Part #1090357 can be used for chairs manufactured
before 9/1/99 as well.
D - Sling Seats and Low Back Captain Seat.
E - High Back Captain Seat.
F - Before 4/1/03. Wiring Harnesses (2) required. Charger Extension Cable (1) required.
G - After 3/31/03. Wiring Harnesses (2) required. Charger Extension Cable (2) required.
H - CTE 8 Amp. charger replaced the obsoleted 4 Amp. charger as of 4/1/04.
I - CTE charger introduced 4/1/04. Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. For wet cell batteries refer to the
8 amp. Lester charger.
I1 - CTE charger looks exactly the same as Dynamic’s charger except for the company name that is silk screened on the
narrow side panel, where the charger plug is (hard wired) attached. Serial number starts with 04A00000001.
NOTE:
57
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 98-289