Insignia NS-L22X-10A - Manual (Page 23)

19
www.insigniaproducts.com
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
2 Press or to select AUDIO. The Audio menu
opens.
3 Press to highlight an option, then press
OK/ENTER to open the sub-menu. You can
select:
• Audyssey Dynamic Volume—Compensates
for sudden changes in audio volume. You can
select Off, Low, Medium, or Heavy.
• SRS TruSurround HD—Provides the ultimate
home theater sound solution. You can select
On or Off.
• Treble—Adjusts high frequency sound.
• Bass—Adjusts low frequency sound.
• Balance—Adjusts the sound between the left
and right speakers.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select RAW
or PCM.
• Audio Language—Selects the audio
language based on the languages supported
by a DTV channel.
• MTS/SAP—Selects the sound mode (for
analog channel only).
• Mono—Produces a clearer sound if stereo
sound is difficult to hear.
• Stereo—Produces dynamic stereo sound
for sporting events and concerts.
• SAP—Selects a second language, weather,
or added commentary, if available.
• Reset Audio Settings— Reset all audio
settings to factory defaults. When you select
this option, a confirmation box opens. Press
or
to select Yes or No, then press OK/ENTER
to confirm.
4 Press or to modify a scale or to move from
left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.)
5 Press MENU to go to the previous menu or EXIT
to close the menu.
Playing TV audio only
When watching TV, you can turn off the TV picture
and listen to the audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Picture
Mode
Brightness
Contrast
Color
Tint
PICTURE AUDIO CHANNELS SETTINGS
MOVE SELECT PREVIOUS EXIT
Adjust settings to affect picture quality
Vivid
42
45
54
0
Sharpness +5
MENU EXIT OK
ENTER
Audio
Audyssey Dynamic Volume
SRS TruSurround HD
Treble
Bass
Balance
PICTURE AUDIO CHANNELS SETTINGS
Digital Audio/SPDIF
MOVE SELECT PREVIOUS EXIT
Adjust settings to affect sound quality
Medium
Off
32
32
0
RAW
MENU EXIT OK
ENTER
Note
• To activate SRS TruSurround HD, you must first
set Audyssey Dynamic Volume to Off.
• If you set Audyssey Dynamic Volume to On
again, SRS TruSurrround HD is set to Off
automatically.
Picture
Mode
Brightness
Contrast
Color
Tint
PICTURE AUDIO CHANNELS SETTINGS
MOVE SELECT PREVIOUS EXIT
Adjust settings to affect picture quality
Vivid
42
45
54
0
Sharpness +5
MENU EXIT OK
ENTER
NS-L22X-10A_09-0222_MAN_V1_English.book Page 19 Thursday, April 2, 2009 12:14 PM