Imperial DS1 - Manual (Page 10)

- 9 -
3. Menu Information
Once you have installed and connected the cables of the Imperial DS1, the menu will is displayed.
This menu consists of 6 main menus as shown below.
· TV Channel
· Radio Channel
· Program Guide
· Antenna Setup
· Channel Search
· Other Option
During the installation the OK key confirms a selection and key shows the Drop Down List
Box. You can also use the numeric keys on the RCU to enter a numeric value.
Use the PR+, PR- key to move up or down from one line to another line. Use the keys to
move from main menu to sub menu and move from left side to right side or vice versa.
To escape the menu system at anytime, press EXIT key on the RCU.
4. Antenna Setup
4.1 Antenna Setup 1) DiSEqC 1.2
1. Antenna : You can select a maximum of 16
antennas with the combination switches.
2. Type : Select your antenna type to be
DiSEqC1.2
3. Satellite : Select first satellite you want.
4. LNB Type : Select your LNB type. If you have
universal LNB, select Univ.
5. LNB Freq. : Enter the proper LNB frequency
referring to your LNB using the numeric keys
on the RCU or use the KEY PAD displayed by
pressing OK key.
If you have a dual LNB, enter the proper value in
the value box.
6. Switches (22KHz Tone, DiSEqC) : You can select the switches with which you want to
configure the antenna.
7. C/Ku band control : You can select C/Ku band control by selectiing the switch type.