Invacare ITFM - Manual (Page 6)

InTouch™ Flovair Seat 6 Part No 1141447
FIGURE 4 Removing/Installing Pelvic Support Layer
Seat Inspection and Cleaning
Inspection
ƽ WARNING
DO NOT continue to use this product if any of the hardware, upholstery
matierals, foams, and/or plastics are found to be deformed, corroded,
breaking, worn, and/or compressed.
Corrective maintenance can be performed at or arranged through your
equipment supplier.
Visually inspect all parts once a week.
Cleaning
Perform one of the following once a week:
Outer Cover
CAUTION
DO NOT use fabric softeners or bleach. DO NOT machine dry. DO NOT dry
in sun. Air dry only.
Machine wash seat cover in cold water on gentle cycle using a mild detergent.
Inner Cover
Hand clean the water repellent inner cover using a soft cloth, warm water and a
mild soap solution. Rinse off and hang dry.
Foam
Wipe the foam with a damp cloth. DO NOT submerge or soak.
Pelvic
Support Layer
Foam
Side Strap
Front Strap
(not shown)
Side Strap
(not shown)
Rear Strap
(not shown)
Foam Contour