Insignia NS-P3114 - Manual (Page 20)

18
NS-P3114 Portable CD Player
www.Insignia-Products.com
6 If you selected:
• Track Copy–Press the PRESET–/ALBUM– or PRESET+/ALBUM+
button to select the album that has the song you want to copy, press
the SKIP–/TUNING– or SKIP+/TUNING+ button to select the song
you want to copy, then press the PLAY/PAUSE/POWER button to
copy the song.
• Album Copy–Press the PRESET–/ALBUM– or PRESET+/ALBUM+
button to select the album you want to copy, then press the
PLAY/PAUSE/POWER button to copy the album.
• Disc Copy–Press the PLAY/PAUSE/POWER button to copy the
disc.
• PGM Copy–Press the PRESET–/ALBUM– or PRESET+/ALBUM+
button to select the album that has the songs you want to copy,
press the SKIP–/TUNING– or SKIP+/TUNING+ button to select the
first song you want to copy, then press the PROG/+10/MEM button
to mark a block of ten songs to copy. Press the
PLAY/PAUSE/POWER button copy the block.
Playing the radio
To play the radio:
1 Turn on your player.
2 Press the FUNCTION button one or more times to select RADIO.
3 To tune to a station:
• Manually–Press the SKIP+/TUNING+ or SKIP–/TUNNING– button
for less than ½ second. Your player tunes to the next lower or next
higher radio station frequency.
• Automatically–Press and hold the SKIP+/TUNING+ or
SKIP–TUNING– button for more than one second until a radio
station frequency appears on the LCD, then release the button.
4 Press and hold the STOP/POWER OFF button for more than one
second to turn off your player.
Notes:
• The headphone cable is your radio antenna. The headphone must be
connected to your player to receive clear reception. If the reception is not
clear, fully extend the headphone cable.
• If automatic tuning does not stop on a station or the reception is poor, you
may have tuned to a weak frequency or your player may be obstructed.
Try moving to a different location or fine-tune the station by pressing the
SKIP–/TUNING– or SKIP+/TUNING+ button.
Selecting the sound mode
You can listen to the radio in stereo or mono mode.
To select the sound mode:
• Press the MODE/ST/MONO button. STEREO appears on the LCD when
the sound mode is set to stereo.
Note: If you experience background noise when listening in stereo mode,
switch to mono mode. The background noise is reduced, but the station plays
in mono mode.
NS-P3114.fm Page 18 Thursday, February 16, 2006 12:44 PM