Insignia NS-A3112 - Manual (Page 16)

16
Insignia NS-A3112 Shelf System with iPod® Dock
www.insignia-products.com
3 Slide the battery holder into the battery compartment until it clicks
into place.
Connecting the AC power adapter
To connect the AC power adapter:
1 Plug the small end of the AC cord into the DC IN 12V jack on the
back of your shelf system.
2 Connect the AC cord to the adapter, then connect the other end of
the adapter to a power outlet.
Warnings
Use only the size and type of battery specified.
Make sure that you follow the correct polarity when installing
the battery as indicated in the battery compartment. A
reversed battery may damage your shelf system.
If you do not intend to use your shelf system for a long
period of time, remove the battery to prevent damage or
injury from possible battery leakage.
Do not try to recharge a non-rechargeable battery. The
battery can overheat and rupture.
Note
Only use the supplied AC power adapter, which has the
following specs: DC12V 3.5A
Unplug the adapter from the power outlet when not in use.