Insignia NS-LCD22-09 - Manual (Page 11)

9
Insignia NS-LCD22-09 22" W LCDTV 720P
www.insignia-products.com
Changing channels
To change channels:
•
Press CH or CH on the remote control
to go to the next lower or higher channel.
Or
Press the number buttons to directly select a
channel (for example, if you want channel 83,
press 8, then press 3).
Or
Press RECALL to go to the last viewed
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel (for example 8).
2 Press –, then press the sub-channel button
(for example 1).
Adjusting the volume
To adjust the volume:
•
Press VOL – or VOL + to decrease or
increase the volume.
• Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.
Displaying status information
To display status information:
•
Press DISPLAY. Your TV displays status
information, such as the channel number or
signal source.
Checking the DTV signal strength
To check the DTV signal strength:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or to highlight DTV Signal. The DTV
signal meter opens.
3 Press MENU or EXIT to close the menu.
Adding a channel label
To add a label to a channel:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or to highlight Channel Labels. The
Channel Label menu opens.
3 Press or to move the cursor to the
channel field, then press or to select a
channel.
4 Press or to move the cursor to the label
field, then press or to select the
character.
5 Press ENTER to return to the previous menu.
Freezing the picture
You can freeze (still) the screen image.
To freeze or unfreeze the picture:
•
Press FREEZE.
Setting the clock
To set the clock:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press or repeatedly to highlight
Feature. The Feature menu opens.
3 Press to enter the sub-menu, then press
or to highlight Time Set. The Time Set
menu opens.
4 Press or move to the different fields,
then press or to change the settings.
5 Press MENU or EXIT to close the menu.
Caution
To protect your TV, do not freeze the screen
image for long periods of time.
ENTER