Part 1. about the dvd ultrabay 2000 drive, Checking the items, Setting up your computer – IBM ULTRABAY 2000 User Manual

Page 9: Enabling the dma setting

Part 1. About the DVD Ultrabay 2000 Drive

The DVD Ultrabay 2000 Drive (hereafter called the DVD option) can be used in
a Microsoft

Windows

95, Windows 98, Windows NT

4.0 Workstation,

Windows 2000 Professional, Windows Millennium Edition (Me), or Windows
XP environment.

This manual explains how to set up your computer and how to view DVD
movies. For information on how to insert the DVD option into your computer,
refer to Access ThinkPad, the on board user’s guide.

To use the DVD option, you need to set up your computer as follows after
inserting the DVD option into the Ultrabay 2000:

Enable the DMA setting (Windows 95, Windows 98, and Windows 2000
users only).

Install WinDVD (the DVD movie player program).

Checking the items

Your DVD Ultrabay 2000 Drive is shipped in a package that includes the
following items:
v DVD Ultrabay 2000 Drive
v This user’s guide
v DVD Software CD-ROM
v Carrying case

Setting up your computer

This section describes how to set up your computer to view DVD movies. Go
to the appropriate section.

Enabling the DMA setting

This section applies to Windows 95, Windows 98, and Windows 2000. Go to
the appropriate section:
v “Enabling DMA settings for Windows 95 and Windows 98”
v “Enabling DMA settings for Windows 2000” on page 1-2

Enabling DMA settings for Windows 95 and Windows 98

To enable the DMA settings for Windows 95 and Windows 98, do the
following:

1-1