Intel GS-SR168 User Manual
Page 44
4 4
GS-SR168 Rack Mount Server
Com Port Address
If this option is set to enabled, it will use a port on the motherboard.
On-board COMA
Use COMA as he COM port address.
On-board COMB
Use COMB as he COM port address.
Disabled
Disable this function. (Default value)
Baud Rate
This option allows user to set the specified baud rate.
Options
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Console Type
This option allows user to select the specified console type. This is defined by IEEE. PC-ANSI
is the standard PC-type terminal. Note that for VT100+, you must select English as your
languuage. And VT-UTF8 uses unicode.
Options
vt100, vt100+, vt100 8bit, PC ANSI 7bit, PC-ANSI, VT-UTF8.
Flow Control
Enables Flow Control when EMP is dahring the same serial port as console redirection, the flow
control must be set to CTS/RTS or CTS/RTS+CD depending on whether a modem is used.
None
Not supported.
XON/OFF
Software control.
CTS/RTS
Hardware control.
(Default values)
Continue C.R. after POST
This option allows user to enable console redirection after O.S has loaded.
On
Enable console redirection after O.S has loaded.
Off
Disable this function. (Default value)