Connecting the power cord – Insignia NS-HDTUNE User Manual
Page 16

14
NS-HDTUNE
www.insignia-products.com
3
Push the battery bracket into the battery
compartment until it clicks into place.
Connecting the power cord
To connect the power cord:
•
Plug the power cord into a power outlet.
Notes
•
If the remote control only works within a
short distance from your radio, replace
the battery.
•
If you do not plan to use the remote
control for an extended period of time or
if you plan to store the remote control,
remove the battery.
•
When you replace the battery, make
sure that you use a battery of the same
type and voltage. The battery is a
CR2025 3 V battery.
•
Dispose of used batteries by following
your local hazardous waste regulations.
Power cord