Image IMBE39400 - Manual (Page 13)

13
25. Attach the Adjustable Bench Leg (49) to the Bench
Leg (48) with the Small Adjustment Knob (81).
Insert a 1 1/2” Square Inner Cap (26) into the top of
the Adjustable Bench Leg (49).
26. Insert two 1 1/2” Square Inner Caps (26) into the
ends of the Leg Lever (62). Insert a 1” Round Inner
Cap (83) into the weight tube on the Leg Lever.
Press a 1” Angled Outer Cap (82) onto the other end
of the weight tube.
Attach the Leg Lever (62) to the Adjustable Bench
Leg (49) with a 3/8” x 2 3/4” Bolt (75) and a 3/8”
Nylon Lock Jamnut (29).
27. Insert 3/4” Round Inner Caps (70) into the ends of the
three Pad Tubes (61).
Insert two Pad Tubes (61) through the holes in the
Leg Lever (62). Slide a Foam Pad (69) onto each
side of the Pad Tubes.
Insert a Pad Tube (61) through the upper tube on the
Adjustable Bench Leg (49). Slide a Foam Pad (69)
onto each side of the Pad Tube.
25
48
49
26
81
26
Weight
Tube
83
26
75
29
82
26
62
49
27
62
70
69
69 49
70
69
61
69
69 70
29. Make sure all parts are properly tightened before
you use the weight bench. The use of the remain-
ing parts will be explained in ADJUSTING THE
WEIGHT RACK, on page 14.
28. Attach the Curl Pad (54) to the Curl Upright (55) with
two 1/4” x 3/4” Screws (50) and two 1/4” Washers (74).
28
74
50
74 55
54