IBM G 78 - Manual (Page 4)

2
Setup
Important: Before connecting the monitor, turn off the computer and attached devices. Also, ensure the power at the
electrical outlet matches the power requirements of the monitor. Refer to the Specifications section on page 14 for
more details.
Connecting your monitor
Step 1. Connect the signal cable to the video port on
the back of your computer. This port might be
directly attached to your computer (figure A),
or it might be part of a video adapter card (fig-
ure B).
Step 2. Connect the power cord to the monitor first,
then firmly insert the plug into a properly
grounded electrical outlet.
Step 3. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly,
refer to the Troubleshooting section starting on
page 15 for help.
ESetup.fm Page 2 Friday, April 14, 2000 12:56 PM