IBM G 78 - Manual (Page 17)

15
DEUTSCH
APPENDIX
ESP
A„OL
IT
ALIANO
SVENSKA
ENGLISH
FRAN‚AIS
POR
TUGUESE
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling
your retailer or IBM, try the suggested actions that are appropriate to your problem.
Problem Possible Cause Suggested Action Reference
Screen is blank and
power indicator is off.
No power to monitor.
Ensure that the electrical outlet and the monitor
are both switched on.
Check that the power cord is Þrmly plugged
into the monitor and the electrical outlet.
If the power cord plug has a removable fuse,
replace it.
Try another power cord.
Try another electrical outlet.
Connecting your monitor
section on page 2.
Screen is blank and
power indicator is
steady green. Brightness and
Contrast might be too
low. Adjust brightness and contrast. User controls section starting
on page 6..
Screen is blank and
power indicator is
ßashing green every
half second. The monitor is in the
Power Management
Standby state. Press any key on the keyboard or move the
mouse to restore operation.
Check the Power Management software on
your computer. Power Management section
on page 13.
ETrbl.fm Page 15 Friday, May 19, 2000 4:55 PM