Chapter 2. using the multi-burner drive, Before you begin, Handling and caring for a disc – IBM ThinkPad 22P7028 User Manual
Page 15
Chapter 2. Using the Multi-Burner drive
This section provides information on how to handle, load, and care for DVDs
and CDs and how to care for your Multi-Burner drive.
Before you begin
For best results, review the following guidelines before using the drive:
v
Do not move your ThinkPad computer while formatting or writing a disc as
this might cause data errors. Also, minimize typing while formatting or
writing to a disc, as this might also cause data errors.
v
Keep the ThinkPad computer on a flat surface when writing to a disc.
v
Make sure the ThinkPad computer is plugged into an ac outlet when using
the drive. The disc might be damaged if the battery runs out while writing
to a disc.
v
Turn screensavers off. Using a screensaver might interrupt the formatting
and writing process.
v
Do not put your ThinkPad computer into hibernation or suspend mode
while writing to a disc.
Note:
The read and write results of the drive depend upon the quality and
characteristics of the DVD or CD media used.
Handling and caring for a disc
Carefully handle and clean discs, especially writable media types such as CD-R
and CD-RW discs, so that they remain readable. You can prolong the life of
your discs by using the following precautions:
v
Always store CD ROMs in their original packaging
v
Always store CD ROMs out of direct sunlight
v
Always store CD ROMs away from direct heat sources
v
Remove CD ROMs from the computer when not in use
v
Check CD ROM for cracks BEFORE each use
v
DO NOT force CD ROMs into the computer/packaging
v
DO NOT bend or flex CD ROMs
IMPORTANT
: DO NOT use CD-ROMs that are cracked.
Attention:
Wiping a disc using a circular motion can cause data loss.
© Copyright IBM Corp. 2003
7