iHome iH82 - Manual (Page 9)

7
Using the iH82
Listening to non-docking iPod or other portable audio devices
If you are using an iPod without a docking port or other MP3 player or audio device, you can play it through the iH82 via the
Line-in Jack.
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your audio device and the other
end of the patch cord into the iH82 Line-in Jack located on the back of the main unit.
Using iH82 as a PA/Karaoke system
The iH82 includes a PA/Karaoke feature. To use it, connect a Microphone with a standard 1/4” phono plug (mic and cable
not included) to the MIC jack located on the back of the main unit then speak or sing into it. Use the Level knob to adjust the
MIC volume to get the right balance between your voice and iPod volume.
Operating the Remote On/Off Switch
To save battery power on the main unit, switch off the Remote Switch located on the back of the iH82 for longer battery life.
Doing so disables the remote.
A/V Output Jack Operation
To output iPod audio video signal from the iH82 to your TV, connect the iH82 to your TV system with an iPod AV cable (not
included). Plug one end into your TV video/audio-in jack(s) and the other end to the A/V output jack located on the back of
the main unit. Turn on your TV and select the input for the AV-in jack signal. Playing video from your iPod will output signal to
your TV.