iHome iP11 - Manual (Page 8)

1. Dock the already playing iPhone/iPod. The iP11 will automatically turn on and you will hear the music playing from your
iPhone/iPod. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode.
For enhanced bass, slide the  EXB Expanded Bass Switch located on the back of the unit to the ON position.
Note: If the playing song/music loudness is too low on the iPhone/iPod itself, the iP11 may not detect that the iPhone/iPod
is in play mode. Press the  iPhone/iPod Play/Pause Button on the iP11 twice to play it.
2. When the iPhone/iPod is docked and in standby mode, press the  iPhone/iPod Play/Pause Button on the iP11 to play
it. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode.
3. Press the  iPhone/iPod Play/Pause Button again to pause play; press again to resume it.
4. Press the  Volume + and  Volume – Button on the iP11 to adjust the system volume.
5. To turn the iP11 OFF, press the  Alarm Reset/Power Off Button. Your iPhone/iPod will continue charging while in the
dock.
5
Listening to your iPhone/iPod
If you are using an iPod without a docking port or other MP3 player or portable audio device, you can still play it through
the iP11 via the  Line-in Jack.
1. Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or line-out jack on
your device and the other end of the patch cord into the iP11  Line-in Jack, located on the back of the unit.
2. Press the  iPhone/iPod Play/Pause Button on the iP11 to turn the unit on. The iPhone/iPod Icon will appear at
the lower right corner the display, indicating Line-in playing mode.
3. Turn on and play your device.
4. Press the  Volume + and  Volume – Button on the iP11 to adjust the system volume. You may need to adjust
your device volume, too.
5. To turn othe iP11 OFF, press the  Alarm Reset/Power Off Button on the iP11. Please remember to turn off your
device, too.
Listening to other portable audio devices
Note: Please make sure you are using the correct insert for your iPhone/iPod (see page 1) and that it is properly docked into
the iP11. Failure to do so may damage your iPhone/iPod.
1. While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). The
iP11 will not overcharge your iPhone/iPod. Note that non-docking iPods will NOT charge.
Charging your iPhone/iPod