iHome iP11 - Manual (Page 4)

1
iP11 Quick Start
2:inserts
Select the dock insert for your
iPhone or iPod model from the table
below and place insert in dock.
Never dock an iPhone or iPod
without an insert in place.
3:iPhone/iPod
Insert iPhone/iPod into dock with proper
insert (iPhone/iPod must not be in a skin or
case). iPhone/iPod will charge while docked.
Press iPhone/iPod Button on iP11 to play
iPhone/iPod.
4:time sync
• Make sure your iPhone/iPod is docked properly (see above).
• Press the
Time sync/set button located on the back of the unit.
A cursor will cycle across the display, indicating sync mode.
• Two beeps will confirm successful syncing and the time will update.
• See “Setting the Clock” on page 5 to set clock manually.
1:power
Attach AC adaptor cable to jack on
back of the iP11 and plug the other
end into a wall socket.
DC 10V line in
dst
-1 +1 on off
NOTE: If you do not have an insert for your iPhone/iPod,
please visit www.ihomeaudio.com or call iHome
toll free at 800-288-2792 to purchase one
iPod Touch 2G
iPhone 3G
Insert 15
nano 5G
insert 18
nano 5G iPhone 3G/ 3GS
iiPod touch 2G
insert 16
For this
iPhone/iPod
Use this insert
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all cells at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75C (167F)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards