IBM 40/80 GB DLT - Manual (Page 9)

Installing the drive in IBM servers
The tape drive is compatible with the Netfinity  8500 or 8500R 4 , Netfinity 7000 8 ,
Netfinity 5500, and Netfinity 5000 servers. For instructions on installing the tape
drive in a server, go to the “Installing Internal Drives” section in the server’s User’s
Handbook and follow the directions for “Installing a 5.25-inch Removable-Media
Drive.”
Note: The server User’s Handbook instructions refer specifically to installing a
half-high drive in a single bay in the server. Your tape drive is a full-high drive
and must be installed in both drive bays in the server.
Part 1: Installation, use, and maintenance guide 1-3