Ikelite DS-50 - Manual (Page 7)

7
Canon
10x
OPTICAL
ZOOM
9.0
MEGA
PIXELS
SX
11
0 I
S
Po
we
rSh
ot
Installing the Camera
1. Pull out on each housing control until it stops. This will get the controls
out of the way for installation of the camera.
2. Remove the Back from Housing and position camera on Mounting Tray.
3. Using a coin or screwdriver (preferred), secure the camera with the tray
mounting bolt which threads into the camera’s tripod socket - diagram A.
Do not cross thread or over tighten the mounting bolt or you may
damage the camera tripod socket threads.
4. RAISE the camera flash. This must be done before closing the
housing.
Opening the Housing
Lid Snaps have a Lock.
To open housing, push Lid Snap Lock
forward and lift as shown. Keep pressure
on the Lid Snap so it does not fly open
quickly. Some Lid Snaps have a lot of spring
tension once they go over center, so keep a firm grip on the Lid Snap.
Lid Snaps may be opened one at a time.
Push Forward
Lid Snap
Lock
Lift
Diagram A
Tray Mounting Bolt
Mounting Tray
Housing Back
Lid Hook
O-ring
RAISE flash before
closing housing