Ikelite DS-50 - Manual (Page 19)

19
Water enters the
housing - Remove, clean and properly lubricate the main
o-ring.
- Look for hairs, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for routine maintenance.
Problem Solution
Pictures are too blue
or too green - Use custom (manual) white balance if available.
Reset for each working depth or when attaching a
color correcting filter.
- Add an optional color correcting filter.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
Replacement Parts
Main Housing O-ring 0110
Vinyl Port Cover 0200
Ikelite Lube 5020
(4 - 1cc tubes)
For light lubrication of the main housing o-ring.
Recommended Accessories
A full range of accessories is available to support your housing. Please visit
http://www.ikelite.com/web_two/can_sx110.html to see the most current
information about recommended accessories.