Chapter 4. preparing to use the multi-burner, Chapter, Preparing – IBM 22P9176 User Manual
Page 27: Multi-burner
Chapter
4.
Preparing
to
use
the
Multi-Burner
Before
using
the
Multi-Burner,
follow
the
procedure
below:
1.
Make
sure
the
Multi-Burner
is
properly
connected
to
your
ThinkPad
computer.
2.
Check
the
locations
of
the
functions
on
the
Multi-Burner
(refer
to
the
figures
below).
3.
Insert
the
IBM
USB
2.0
Portable
Multi-Burner
Software
and
User’s
Guide
Super
CD
that
was
shipped
with
this
option
to
install
the
CD-R/CD-RW/DVD
writing
software.
4.
Double-click
on
the
application
you
want
and
follow
the
instructions
on
the
screen.
5.
Check
that
the
drive
operates
normally
and
keep
the
enclosed
warranty
in
a
safe
place
after
filling
it
in.
Check
that
nothing
is
placed
on
the
top
cover
when
ejecting
a
CD
or
DVD.
When
normal
ejection
is
impossible,
an
error
message
may
appear
on
your
computer.
When
ejection
is
not
performed
normally,
open
the
top
cover
manually
and
close
it
securely
after
removing
anything
that
may
be
on
the
cover.
Following
are
the
locations
of
the
functions
on
the
Multi-Burner:
1
Top
cover
The
top
cover
must
be
closed
to
play
a
disc.
2
Disc
tray
Set
the
media
with
the
label
face
up
on
the
disc
tray.
3
USB
connector
Insert
the
plug
of
the
provided
dedicated
USB
cable.
4
DC
IN
connector
Connect
the
provided
AC
adapter
or
cable
assembly
DC
IN
connectors.
This
drive
can
also
be
used
under
USB
Power
Only
with
certain
limitations
(refer
to
©
Copyright
IBM
Corp.
2003
4-1