IOGear GCS1712 - Manual (Page 19)

16
Operation
Navigation:
To exit from the OSD menu at any time press [ESC]
Use the Up and Down arrow keys to move through the list one line at a time
Use [PG UP] and [PG DOWN] to move up or down through the list, one screen at a time
To activate a port move the Highlight Bar to the desired port and press [ENTER]
Function Keys:
F1 PREV KVM:
Pressing [F1] switches console from the currently active computer to the previous one on the installation. Keep on pressing [F1] to move the Highlight Bar
until it is on the desired computer, then press [ENTER].
F4 NEXT KVM:
Pressing [F4] switches console from the currently active computer to the next one on the installation. Keep on pressing [F4] to move the Highlight Bar until
it is on the desired computer, then press [ENTER].
F5 PREV Device:
Pressing [F5] switches USB devices from the currently active computer to the previous one on the installation. Keep on pressing [F5] to move the Highlight
Bar until it is on the desired computer, then press [ENTER].
F8 NEXT Device:
Pressing [F8] switches USB devices from the currently active computer to the next one on the installation. Keep on pressing [F8] to move the Highlight Bar
until it is on the desired computer, then press [ENTER].