InFocus IN3116 - Manual (Page 12)

11
Adjusting the image
If necessary, adjust the height of the projector by pressing the elevator foot release
button to extend the foot.
Rotate the elevator feet for granular adjustment of the projector’s height. Avoid
placing your hands near the hot exhaust vent at the side of the projector.
Avoid placing your hands near the hot exhaust vent at the side of the projector.
Position the projector to the desired distance from the screen at a 90 degree angle to
the screen. See page 6 for a table listing to screen sizes and distances.
Adjust the zoom or focus.
If the image is not square, first make sure that the projector is perpendicular to the
screen. To reduce the size of the top edge of the image, press the top Keystone
button. To reduce the size of the bottom edge of the image, press the bottom
Keystone button.
If the left or right side of the screen is larger or smaller than the other, you can turn
the projector to the left or to the right a few degrees to square the image. See page 6
for details.
Adjust the Contrast or Brightness in the Basic Picture menu. See page 27 for help
with these menu adjustments.
Adjust height
Adjust distance
Adjust zoom and focus
Adjust keystone