Invacare, 3g torque, 3accessories and options – Invacare 3G Torque User Manual
Page 6

Invacare
®
3G Torque
™
3
Accessories and Options
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, OH USA
44035-4190
800-333-6900
All rights reserved. Trademarks are identified by the symbols ™ and ®. All
trademarks are owned by or licensed to Invacare Corporation unless otherwise
noted.
Monroe is a registered trademark of Tenneco Automotive, Inc.
Therafin is a registered trademark of W/R Medical Electronics Co.
Products designated by ASL are Manufactured by Adaptive Switch Labs, Inc.
Specifications and prices are subject to change without notification.
©2008 Invacare Corporation
Form No. 07-031
Chair Features and Options
• Independent rear wheel suspension with new rubber element design
• 5.8 mph standard speed range
• Programmable performance to meet individuals needs
• 17 1/2'' Seat-to-Floor Standard, 19 3/4'' and 21 1/2'' Optional
• Seat location system allows for balanced weight distribution
• Continuous tilt seat 0° - 10°
• Dynamic anti tippers
• Rigid seat pan
• Convenient rear battery access
• 22NF batteries (standard) In a single 22NF battery box Single battery
connector
• Arms are flip back/removable
• Adjustable depth rigging attachment 2'' (1'' increments)
• Automatic dual mode battery charger (Lester Brand)
• Compact size: 24 3/4'' overall base width w/14'' x 3'' wheels
• Weight limit <300 lb.
Weight Limit 300 Pounds
Invacare recommends all wheelchairs be fitted and programmed to the consumer
under the guidance of a healthcare professional, knowledgeable of the particular
limitations of the product.
NOTE: All weight limits are inclusive of add-on equipment and seat systems.
Footrest Extension Range
AT5043
AT5543
1651
60HD
N/A
12 ¼” – 16 ½”
13 ½” – 17 ½”
SWING914
N/A
7 ¾” – 12 ½”
9 ½” – 14 ½”
70MFX
6 ¾” – 12 ½”
4 ½” – 10”
N/A
70NHD
N/A
10 ¾” – 15 ¾”
11 ¾” – 17”
70STAPER
N/A
12 ½” – 16 ½”
13 ¼” – 17 ¼”
90SWING
4” – 9”
5” – 8” N/A
Measured from Seat Pan to Back of Footplate
Torque 3 Specifications
*
Overall
Width
25''
w/14''x3''
wheel
27.5''
w/14''x4''
wheel
**Overall
Length
28.5"
Short
Base
31.5"
Long
Base
***Seat-to-Floor
17.5'' Standard
Low
19.75''
Optional
Medium
21” Optional Tall
Battery
22NF deep cycle; gel/sealed (Not supplied)
Shipping Weight 266 lb. (18" X 18" seat w/Group 24 batteries)
*Measurement based on wheel base. Seat width is width picked
plus 7.5" for the armrest and joystick.
**Measured from headtube to anti-tipper.
***Based on 5° tilt and 16" seat depth; add 1/4" for additional 2" of
seat depth
Note: All specifications and dimensions are approximate.
Manual Recline Specifications
Seat Widths
14''-22'' (1'' increments)
Seat Depths
16''-22'' (1'' increments)
(Adjustable 16''-19'', Fixed 20''-22'')
Back Heights
24'' Standard, 18 1/2'', 20'', 22'', 24'', 26''
Weight Limits
300 lb. with Standard Cylinders
Headrest
10'' Height
Recline Range
90° to 170° (Approximate)
Overall Back Height
Low Seat
Med. Seat
High Seat
(w/o extension)
Standard Base
41 1/2''
43
1/2''
45
1/4''
(Measured with 5° Tilt and 10" for Extension)
Contoura Seat Sizes
D16 D17 D18
D19 D20 D21 D22
W16
X X X X X * *
W18 X X X X X * *
W20 X X X X X X X
W22 * * X X X X X
W24 * * X X X X X
*Not available with Contoura Seat Cushion.
Back Heights
25” or 29.5”
Memory Card - BASIC
• Standard with ALL Expandable Control Systems (MPJ+, PSR+, PSF+, MK6i
Display).
• Used to Back Up/Restore Programmed Settings for Only One Chair.
• May be given to user or kept with provider's files for safe keeping.
• Does not Contain Advanced Diagnostics/Help Screens/File Structure.
• Not compatible with SPJ+ Joysticks.
Memory Card - PROFESSIONAL
• Standard with ALL MK6i Programmers.
• Available also with USB Card Reader on Order Form.
• Contains Advanced Diagnostics, Help Screens, Software Updates, File
Storage/Retrieval.
• Used to back up multiple chairs and programming settings.
• Intended for use by qualified providers only.
• Not compatible with SPJ+ Joysticks