Invacare Solara Jr. 1106628 - Manual (Page 9)

Part No. 1106628 9 Solara jr.™
STABILITY - ALL MODELS EXCEPT RECLINERS
WARNING
To maintain maximum stability, position the rear wheels in the most rearward posi-
tion in the axle mounting plate. Moving the rear wheels to any of the other mounting
positions causes the wheelchair to decrease in stability.
If moving the rear wheels to ANY forward position, ensure the wheelchair is stable
BEFORE using.
ALWAYS ensure stability BEFORE using maximum amount of tilt-in-space or moving
the rear wheels forward. TEST wheelchair BEFORE it is occupied by the end user to
ensure safety.
STABILITY - ALL MODELS
STABILITY WARNING
The back height, seat depth, back angle, seating system, tilt angle, seat height, size/
position of the rear wheels, size/position of the front casters, as well as the user
condition directly relate to the stability of the wheelchair. Any change to one (1) or
any combination of the eleven (11) may cause the wheelchair to decrease in stability.
These adjustments MUST be performed by a qualified technician.
ALWAYS make sure that the wheelchair is stable BEFORE using the tilt-in-space.
Back Height Seat
Depth
Back
Angle
Seating
System
Tilt
Angle
Caster
Size
Caster
Position
Wheel
Size
Wheel
Position
User
Condition
Wheel
Locks
Anti-Tippers Locking
Collar
NOTE: When changes to the left hand column occur, follow across the chart and refer to the ü
procedure to maintain the proper stability, safety and handling of the wheelchair.
Back Height • ь ь ь ь ь ь ь ь N/A N/A N/A N/A
Seat Depth ь • ь ь N/A ь ь ь ь N/A N/A N/A ü
Back Angle ь ь • ь ь ь ь ь ь N/A N/A N/A ü
Seating System ь ь ь • ь ь ь ь ь ь N/A N/A N/A
Tilt Angle N/A N/A ü N/A • N/A N/A N/A N/A N/A N/A N/A ü
Caster Size ü N/A ü N/A N/A • ь ь ь N/A ь ь ь
Caster Position ü N/A ü N/A N/A ь • ь ь N/A ь ь ь
Wheel Size ü N/A ü N/A N/A ь ь • ь N/A ь ь ь
Wheel Position ü N/A ü N/A N/A ь ь ь • N/A ь ь ь
User Condition ь ь ь ь ь ь ь ь ь • N/A N/A N/A
Seat Height ü N/A ь ь ь ь ь ь ь N/A ь ь ь
PROCEDURE 1 GENERAL GUIDELINES
GENERAL
GUIDELINES