Automatic reconnection from waiting mode – IGo Direct Bluetooth Keyboard User Manual
Page 12
Even when disconnected, the mobile device and the keyboard remain
bonded. The keyboard will only reconnect to the bonded mobile device and
the mobile device will only listen to the bonded keyboard. To break the bond
press the Discoverable button for approximately 1 second or until the green
LED flashes quickly. Normally the bond will not need to be broken unless the
keyboard will be used with another mobile device or another keyboard will
be used with the mobile device.
NOTE:
Do not press Discoverable button. This
will break the bond between the keyboard and
the mobile device. If this happens, you will
have to establish a new connection as
described in the
section above.
Automatic Reconnection from Waiting Mode
Some mobile devices have more restrictive Bluetooth settings than others, in
terms of the type of operating mode, or the type of paired device the
software will allow reconnection with from waiting mode. If your Stowaway
keyboard software returns to waiting mode, tapping any key on the
keyboard will not trigger automatic reconnection in certain circumstances.
This may be because the settings in the Bluetooth stack on your mobile
device have restricted reconnection from devices that are not Authorized,
or that the Bluetooth Auto operation mode selection disallows reconnecting.
If you encounter problems auto-reconnecting from BT Waiting for
keystrokes mode, you will want to review Bluetooth Help for specifics on
Bluetooth connectivity for your mobile device.
Stowaway Bluetooth Owner’s Manual for Symbian UIQ
Page 12